Druk 3D - Fibometry, profesjonalna drukarnia
Druk 3D - Fibometry, profesjonalna drukarnia
Back
Home » Technology » PJ/MJM

PJ (Poly Jet) / Multi Jet Modelling (MJM)

In resin technologies PJ (Poly Jet) and MJF (Multi Jet modeling) the processed material is a material in the form of a photosensitive resin. The polymerization process is carried out through the UV lamp energy which realizes the polymerization of selectively superimposed sections of the produced model. Resin technologies are used in a wide range of applications, e.g. automotive, biotechnology, medicine and jewelry. High precision of parts and a wide range of materials constitute additional advantages of these technologies. Advanced geometries require support structures that in most cases can be removed relatively easy with dissolution or rinsing. If support structures cause problems in your project, check out SLS.
Start Working with the PJ / MJM Technology
Grab to browse through the gallery     →

What are the benefits of PJ / MJM?

Benefit #1

High resolution and dimensional accuracy of 3D printing thanks to the ultra-thin layer thickness (from 16 µm)

Benefit #2

Possibility to produce multi-material and multi-colored parts

Benefit #3

Material variety (from rubber-like materials to hard materials)

Benefit #4

Relatively easy post-processing - supporting structures removed with a water jet

Materials

Standard resin

The most popular resin that is characterized by stiffness.

Contact Your Specialist

Resins imitating the properties of engineering material: ABS-like, PP-like

The mechanical properties of these resins are similar to those of ABS and PP.

Contact Your Specialist

Flexible resin

Resin with properties similar to rubber.

Contact Your Specialist

High-temperature resin

Resin designed for applications operating at higher temperatures (up to 80 °C).

Contact Your Specialist

Super clear resin

The material is designed for applications where high transparency is required. Possible further processing which allows for almost 100% transparency.

Contact Your Specialist

Dental/medical resin

Resin used in medicine. It has a biocompatibility certificate.

Contact Your Specialist

Costs and Lead Time

What influences resin costs and lead time

  • Part capacity
  • Used material
  • Used parameters (e.g. layer thickness)
  • Bottom brackets - check other technologies without support
  • Production series size
  • Applied postprocessing - more information in postprocessing
  • Choosing express execution options

Want to optimize costs?

Contact Your Specialist

Want to optimize costs?

Resin technologies design guidelines

With For PJ / MJM technology, we recommend that you follow these recommendations:

Zasady druk 3D

Minimum hole diameter 2 mm

Zasady druk 3D

Minimum wall thickness from 0.6 mm depending on the geometry

Zasady druk 3D

The access to areas with a bottom bracket should be secured in order to remove it

Zasady druk 3D

Positioning pins should be at least 2 mm thick/medium

Not sure about your design?

Check with the CAD Design Team

Not sure about your design?

© Fibometry 2023 All rights Reserved
Druk 3D – profesjonalne usługi.
Drukarnia 3D, prototypowanie, druk części zamiennych.
SLS, MJF, FDM/FFF, SLA/DLP, PJ/MJM, DMLS/SLM

Design: ZIIJN

Newsletter


    Information obligation when subscribing to the newsletter Fibometry (brand of New Era Materials sp. z o.o.).
    In accordance with Article 13 of the General Data Protection Regulation of 27th April 2016 (Official Journal of the EU L 119 of 04.05.2016), we inform you that:

    1. The administrator of your personal data is New Era Materials sp. z o.o. based in Modlniczka, 1/7 Komandosów Street, 32-085 Modlniczka, Poland.

    2. Your personal data will be processed for the purpose of subscribing to the newsletter on the basis of Article 6(1)(a) of the General Data Protection Regulation of 27th April 2016.

    3. The recipients of your data will be hosting and mailing service providers and website content management companies.

    4. Your personal data will be processed until you withdraw your consent.

    5. Your data will not be profiled.

    6. Your personal data will not be transferred to a third country (i.e. a country outside the European Economic Area).

    7. You have the following rights in relation to the processing of your personal data:

      - access to your personal data

      - rectification, erasure or restriction of the processing of personal data

      - to portability of personal data

      - to withdraw your consent to the processing of your personal data

      - to lodge a complaint to the supervisory authority, which is the President of the Office for Personal Data Protection

    8. In order to exercise your rights, please contact the Data Protection Officer at: odo@neweramaterials.com

    9. The provision of personal data is voluntary, but is a necessary condition for the provision of the newsletter subscription service.

    10. You can unsubscribe from the newsletter at any time by sending a request to marketing@neweramaterials.com.

    © Fibometry 2020 All rights Reserved
    Design: ZIIJN Coding: CMS Producer